Yookidoo Flow 'N' Fill Spout
Yookidoo Flow 'N' Fill Spout
Yookidoo Flow 'N' Fill Spout is a bath toy with three stackable cups and an automated spout. The world’s best selling bath toy designed for hours of fun with its endless stream of water! Fun, durable, and super entertaining!
- A battery operated bath spout that easily attaches and draws water from the tub creating an endless stream without wasting water from the bath tap.
- 3 interchangeable bath cups each with a different water straining and spraying effects.
- Stack cups and watch water run through them all!
- Watch the water spin the propeller.
- Block the crazy finger sprinkler for cool water squirts!
- Easy for kids to operate; specially designed for small hands.
- Swiveling arm holds the bath cups - for playing, stacking and storage.
Recommended for babies 9+ months.
- Start the water flow – show your child how to turn on the spout by pressing the goggles. This will initiate a constant water flow.
- Let him turn it on himself, teaching him cause and effect.
- Demonstrate the effects of each tumbler and encourage him to swap and change the tumblers, as well as to nest them in each other in any order he chooses.
- Promotes eye-hand coordination and fine motor skills.
- Promotes sensory development.
- Introduces children to cause and effect process and to concepts such as full/empty, heavy/light, floating/sinking.
- 1 x Battery operated spout.
- 1 x Propeller tumbler.
- 1 x Shower tumbler.
- 1 x Peek-a-boo tumbler and float.
Click here for instruction manual.
Package Dimensions: 7 x 3 x 14.5 inches
Yookidoo’s bath toys are all battery operated. Should there be any concerns regarding the battery compartment getting wet?
Yookidoo introduced the first ever motorized bath toys. Motorized means that our bath toys are all battery operated and putting batteries inside water is not a simple issue. We have worked very hard to create a compartment that is sealed just enough not to let water get through but, on the other hand – is not too tight and enables the water pump’s propeller to rotate freely.
Yookidoo’s bath toys are all battery operated. Should there be any safety concerns?
Yookidoo revolutionized the bath toy category by developing patented motorized bath toys. There are no safety concerns regarding putting battery operated bath toys in water because the battery compartment contains a rubberized seal which prevents leakage.
Are there any other safety concerns?
No, Yookidoo toys are vigorously tested for international safety standards according to the highest possible standard. Our products are free of phthalates, BPA, lead and PVC.
The Spout stopped working:
- The product stops working when the propeller or filter are blocked by dirt, hair soap or rust. In order to fix this, unscrew filter and pull it out. Wash with soap and water, ensuring that the filter mesh is completely clean. Make sure the propeller rotates freely. If it does not, try to release whatever is causing it to be stuck with a sharp object, such as a screwdriver, until it rotates freely again. Reinsert filter and screw into place.
- Change batteries
The water flow from the spout is too slow:
- Allow the pump to be filled with water – plug the water output hole at the end of the spout with a one finger for a minute.
- Clean filter – clean mesh and make sure that the filter propeller spins freely.
- Change batteries.
The spout doesn’t work:
- Verify correct polarity of batteries.
- Insert the batteries.
Are batteries included in the Flow ‘N’ Fill Spout?
No. Batteries are not included.
What type of batteries are needed to operate the Flow ‘N’ Fill Spout?
3 X AA batteries.
Where is the battery compartment located on the Spout?
The battery compartment is located on the back of the spout unit.
How do I insert batteries?
Attention! Before inserting batteries, ensure the product is dried thoroughly!
To insert batteries, unscrew the battery compartment cover (located on the back of the spout unit) with a Phillips Head screwdriver. Insert 3 X 1.5V AA (LR6) batteries, ensuring correct polarity. Replace the compartment cover and screw firmly into position.
Attention! Before using, make sure the battery compartment is completely sealed tight!
How do I fix the spout to the bath tub?
Use the suction cup located on the back of the spout unit to fix the spout to the bath tub
What is the water level needed to operate the spout?
In order to operate the spout make sure the water level is such that it the pump unit is submerged in the water
How do I start the water flow from the spout?
To start the water flow from the spout, press the goggles located on the red part of the spout unit and wait for a couple of seconds.
Which water effects are created by the water cups?
- Create a shower.
- Spin the propeller.
- Watch the peek-a-boo friend float to the top.
How do I clean the filter?
Unscrew the filter (located on the side of the pump unit) and pull it out. Wash with soap and water, ensuring that the filter mesh is completely open. Make sure the inner propeller is also clean and spins freely. Re-position the filter and screw firmly into place.
How often should I clean the filter?
The filter should be cleaned every time batteries are replaced.
- Yookidoo Submarine Spray WhaleS$44.90 List Price: S$59.90
- Yookidoo Spin 'N' Sort Spout ProS$52.90 List Price: S$59.90
- Yookidoo 2 Stage Sensory Bath Baby MobileS$52.90 List Price: S$59.90
- Yookidoo Submarine Spray StationS$53.90 List Price: S$59.90
- Yookidoo Tumble Ball StackerS$46.90 List Price: S$59.90
- Yookidoo Crawl 'N' Go SnailS$55.90 List Price: S$69.90
- Yookidoo Pull Along Whistling DuckS$52.90 List Price: S$59.90